Water leakage problems at the Tangab Dam Reservoir (SW Iran), case study of the complexities of dams on karst

Bulletin of Engineering Geology and the Environment - The Tangab Dam was constructed at a unique geological structure, within a karst valley at the deepest point of a saddle-shaped feature which...     

Spark plasma sintering of Al-doped ZrB2–SiC composite

This research presents the influence of Al addition on microstructure and mechanical behavior of ZrB₂–SiC ultra-high temperature ceramic matrix composite (UHTCMC) fabricated by spark plasma sintering (SPS). A 2.5?wt% Al-doped ZrB₂–20?vol% SiC UHTCMC was produced by SPS method at 1900?°C under a pressure of 40?MPa for 7?min. The microstructural and phase analysis of the composite showed that aluminum-containing compounds were formed in-situ during the SPS as a result of chemical reactions between Al and surface oxide films of the raw materials (i.e. ZrO₂ and SiO₂ on the surfaces of ZrB₂ and SiC particles, respectively). The Al dopant was completely consumed and converted to the intermetallic Al₃Zr and Al₄Si compounds as well as Al₂O₃ and Al₂SiO₅. A relative density of 99.8%, a hardness (HV5) of 21.5?GPa and a fracture toughness (indentation method) of 6.3?MPa?m^1/2 were estimated for the Al-doped ZrB₂–SiC composite. Crack bridging, branching, and deflection were identified as the main toughening mechanisms.     

Direct current electrodeposition of Zn and Zn–SiC nanocomposite coatings

Pure Zn and Zn matrix composite coatings containing nano-sized SiC particles with an average size of 50 nm were prepared from the zinc sulphate bath. The effect of the particle concentration and current density on the amount of particles embedded was examined. Electron microscopic studies revealed that the coating morphology was modified by the presence of SiC nanoparticles. Corrosion resistance properties of the coatings were studied using a potentiodynamic polarisation technique in 1M NaCl solution. It was established that agglomeration of nanoparticles worsens corrosion resistance properties of Zn–SiC coatings. However, the presence of well dispersed nanoparticles significantly improves the corrosion resistance of the zinc. Incorporation of SiC nanoparticles also improves the microhardness of the zinc matrix.     

Sweet lemon mechanical damage detection using image processing technique and UV radiation

Non-destructive measurement of qualitative parameters of agricultural produce is quite beneficial in the postharvest operations. The consequential effect of mechanical damage in citrus fruits is rarely visible in their appearance compared to other commodities. The purpose of this study was to propose a fast, non-destructive method for sweet lemon mechanical damage detection using image processing technique and UV radiation. For this purpose, 135 sweet lemons were tested based on a completely randomized factorial design. In order to examine mechanical damage, the independent variables included drop height, fruit diameter and tempering period (holding time at room temperature after treatment). Fruits were dropped from heights of 2, 2.5 and 3 m onto the ground. Then images were captured under UV light having a wavelength of 365 nm, 1, 3 and 6 days after treatment. The images were sent to a PC and analyzed using MATLAB software. “Green Spot Index” or GSI was defined to show the extent of mechanical damage. Results of the analysis of variance showed that the percentage of green spots on fruit skin is significant at the 1% level considering the main and double interaction effects of drop height and fruit diameter. Green spot index significantly increases with the level of mechanical damage. Accuracy of the developed method in differentiating the bruised and undamaged fruits was found to be 100%.     

3D and simplified pseudo-2D modeling of single cell of a high temperature solid oxide fuel cell to be used for online control strategies

In the current study, a single cell of a planar SOFC is firstly modeled in 3D using commercial SOFC module of ANSYS Fluent and the results are validated against the experimental investigations in the literature. Many researchers have used ANSYS Fluent for simulating solid oxide fuel cells. However, there is a huge gap in the literature on explaining the detailed procedure that should be followed in order to use this software effectively. A thorough step-by-step approach is presented to provide a deep insight into the software. Thereafter, a simplified quasi-2D method with infinitely shorter computational time is developed and the results are compared with the 3D model. It is found that the reduced model is capable of being utilized as an alternate method for both online diagnosis and designing active control strategies.     

Time‐domain hybrid formulations for wave simulations in three‐dimensional PML‐truncated heterogeneous media

We are concerned with the numerical simulation of wave motion in arbitrarily heterogeneous, elastic, perfectly‐matched‐layer‐(PML)‐truncated media. We extend in three dimensions a recently developed two‐dimensional formulation, by treating the PML via an unsplit‐field, but mixed‐field, displacement‐stress formulation, which is then coupled to a standard displacement‐only formulation for the interior domain, thus leading to a computationally cost‐efficient hybrid scheme. The hybrid treatment leads to, at most, third‐order in time semi‐discrete forms. The formulation is flexible enough to accommodate the standard PML, as well as the multi‐axial PML. We discuss several time‐marching schemes, which can be used à la carte, depending on the application: (a) an extended Newmark scheme for third‐order in time, either unsymmetric or fully symmetric semi‐discrete forms; (b) a standard implicit Newmark for the second‐order, unsymmetric semi‐discrete forms; and (c) an explicit Runge–Kutta scheme for a first‐order in time unsymmetric system. The latter is well‐suited for large‐scale problems on parallel architectures, while the second‐order treatment is particularly attractive for ready incorporation in existing codes written originally for finite domains. We compare the schemes and report numerical results demonstrating stability and efficacy of the proposed formulations. Copyright © 2014 John Wiley & Sons, Ltd.     

Drawing in Time: Processes of Design and Fabrication

Drawing embeds time within itself, notating changes in space and duration. For Babak Bryan and Henry Grosman , founding partners of BanG studio in Long Island City, New York: ‘The drawing is a result of process, but it also describes process.’ It is only through this temporal practice that an essential connection is developed between drawing and building. With the widespread adoption of building information modelling (BIM), linear graphic representation finds itself in crisis, challenged by the static inertia of the model. As Bryan and Grosman describe, the well-crafted drawing remains essential to their studio's approach informing the method of ‘making and remaking’.     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

Investigation of structure and mechanical properties of toughened poly(l‐lactide)/thermoplastic poly(ester urethane) blends

In this study, poly(l ‐lactide) (PLA) is melt‐blended with thermoplastic polyurethane (TPU) to modify the brittleness of PLA. An aliphatic ester‐based TPU was selected in order to have an ester sensitivity for degradation and an inherent biocompatibility. Using this compatible TPU, there was no need to apply problematic compatibilizers, so the main positive properties of PLA such as biocompatibility and degradability were not challenged. The detected microstructure of PLA/TPU blends showed that when the TPU content was lower than 25 wt %, the structure appeared as sea‐islands, but when the TPU content was increased, the morphology was converted to a cocontinuous microstructure. A higher interfacial surface area in the blend with 25 wt % TPU (PLA25) resulted in a higher toughness and abrasion resistance. The various analyses confirmed interactions and successful coupling of two phases and confirmed that melt‐blending of PLA with the aliphatic ester‐based TPU is a convenient, cost‐effective, and efficient method to conquer the brittleness of PLA. The prepared blends are general‐purpose plastics, but PLA25 showed an optimum mechanical strength, toughness, and biocompatibility suitable for a wide range of applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43104.